Main facilities

Main Facilities

Introduction of Atsuita Press Industry Co., Ltd’s Facilities

Atsuita Press Industry Co., Ltd. has all of the facilities necessary for bending, spinning, and stamping.
We own five hydraulic press facilities, which are necessary for stamping, throughout Japan.
We own four spinning facilities.
The unique technologies of these facilities enable bending, spinning, and stamping.
We own approximately 80 machines, which enables us to provide our services at low cost and with short lead-times.
If you are interested in Atsuita Press Industry Co., Ltd.’s unique bending, spinning, or stamping technologies, please contact us. We are happy to assist you with your needs.

Headquarters Factory

Site Area 3050㎡
Production Workers 29名

Machining Facilities

Name Number Notes
2500-Ton Hydraulic Press 1
1500-Ton Hydraulic Press 1
1000-Ton Hydraulic Press 1
500-Ton Hydraulic Press 1
Heating Furnace 1 3600 mm width × 4200 mm
depth × 1500 mm height
Crane 15 Maximum Load: 10 tons
Arc Welding Machine 8
Semi-Automatic Welding Machinea
(MIG/MAG)
7
TIG Welding Machine 2
Plasma Cutter 2 Cuttable SheetThickness: Max 90t
Gas Cutter 6 Cuttable SheetThickness: Max 200t

Iga Factory

Site Area 3565㎡
Production Workers 11

Machining Facilities

Name Number Notes
F1 Spin-Forming Machine 1 Maximum machinable area:φ4500×1300H ×16t
F0 Spin-Forming Machine 1 Maximum machinable area:φ3800×1800H ×35t
F2 Spin-Forming Machine 1 Maximum machinable area:φ1250×800H  ×6t
F3 Spin-Forming Machine 1 Maximum machinable area:φ1500×600H  ×9t
300-Ton Hydraulic Press 1
Bending Roll 3 Maximum machinable width:3050 mm × 16t
Crane 5 Maximum load: 10tons
Arc Welding Machine 6
Semi-Automatic Welding Machine (MIG/MAG) 6
TIG Welding Machine 3
Plasma Cutter 1 Cuttable Sheet Thickness: Max60t
NC Plasma Cutter 1 Cuttable Dimensions: 2500 mm×6200mm×Max25t
Gas Cutter 6 Cuttable Sheet Thickness: Max200t

Certifications Obtained

Welding Certifications

Type of Steel Welding Method Sheet Thickness Position Certification Type Number of People
Carbon Steel Shielded metal arc welding Thick Flat position N-3F 8
Carbon Steel Shielded metal arc welding Thick Vertical position N-3V 2
Carbon Steel Shielded metal arc welding Thick Horizontal position N-3H 4
Carbon Steel TIG welding Thick Flat position T-1F 1
Carbon Steel MAG welding Medium Flat position SN-2F 2
Stainless Steel MIG/MAG welding Medium Flat position MN-F 4
Stainless Steel TIG welding Thin Flat position TN-F 3
Aluminum MIG welding Thick Flat position MN-3F 1
Aluminum MIG welding Medium Flat position MN-2F 2
Aluminum TIG welding Thin Flat position TN-1F 1
NK Normal Steel Manual welding No limit Flat position CS-M-A-3-F 1
NK Normal Steel Semi-automatic welding No limit Flat position CS-S-A-3-F 1
Ordinary Boiler Welder 3
Welding Work Instructor 1

Other

Non-Destructive Test Engineer Welding Removability Penetrant Inspection: Level 2 3
Non-Destructive Test Engineer Ultrasonic Thickness Measurement: Level 1 2

Introduction of Facilities

Copyright(C)2014 Atsuita Press Industry Co.,Ltd. All Right Reserved.